I recently pulled the trigger on my first Swellpro, the SD3+Fisherman. So far so happy but, I do see it's shortcomings technology wise. One being the archaic Swellcam app. While I can turn on Time Stamp for photos, there's no option for video. Additionally, there is no option to set the current time. When I set Time Stamp to "ON" there is no additional setting so I assumed that it would get the time info from the GPS. That doesn't seem to be the case. Photos/Videos are all Jan/17 something. So then I thought perhaps the setting was within the Assistant App. Again not the case. Am I missing something here? Time/Date Stamp should be a rather straight foreword function. I can get it right on my $50 point and shoot camera so.... Anyone else have this issue or, am I just stupid? It's okay if I'm stupid, it wouldn't be the first time but, I didn't expect my SD to be stupid.
I don't think there is a way to set the date/time. This drone is forever in August of 2016. However, I've noticed that when you connect to the ground station and Fly app on your phone, the footage will have the correct date and time.
Welcome to Shoutbox! Our quick and easy way to chat with each other!
nev: where can I get latest firmware for rc
Sept 29, 2019 17:09:24 GMT
jefroe64: thanks for the reply. still up in the air, so to speak. I'll keep looking.
Aug 3, 2019 0:20:36 GMT
workevader: Hi, new to forums all together. Was wondering if anyone knows how to check to see if you need to update the firmware before you actually do it? Not sure where or how to ask this in a thread or whatever.
Jul 28, 2019 21:33:13 GMT
sharkstewards: Problem with monitor- static image and red/green light when turned on. Moisture? Advice?
Jun 10, 2019 23:51:25 GMT
ocrich: Hello, I have a new sd3 and the 4K camera doesn’t work... dead. The other factory camera seems to work ok but often not at all. Seems to be intermittent. The 4K is totally dead, any ideas if it’s a software issue or camera issue ? Thanks
Apr 16, 2019 8:19:00 GMT
cj49660: Need help updating my spry, is this the place for help?
Apr 13, 2019 19:27:09 GMT
palometa: I have tried repeatedly to update the firmware over the last month...many times...with no success.
Mar 14, 2019 14:04:00 GMT
markdal: Hi Guys, I don't have my Splash Drone ye. I am in the process of closing don both my Companys, of which I am the Chief Pilot since 2007. In retirement I intend to use a Splash Drone from my boat. Not sure of posting here?
Feb 15, 2019 6:45:34 GMT
skillzmb: 360 Cam on Splash drone!!
Jan 4, 2019 0:23:28 GMT
atlantic: Camera Lens Fogged? It clears when I leave it over a low heat source but fogs up again within 30 mins after being removed?
Nov 13, 2018 9:28:25 GMT
zuluboy: I don't want fly until I'm sure the commissioning is good,
Oct 25, 2018 8:18:12 GMT
zuluboy: Hi Any out there with some knowledge of body replacement on Splash drone 3 auto, need wiring diagram on the motor connections, transferred all the guts to new body, marked the motors wires all seems fine tested without props, one motor running hot
Oct 25, 2018 8:15:52 GMT
ambudrone: Wherever direction I push the joystick, the motor stops to that direction.
So if I push it forward then the two frontal motors stop. If I push it backwards, then the two motors at back stop. can anyone find a quick solution? THX
Sept 13, 2018 13:18:30 GMT
propwash: screnegar: I suggest you get the latest user manual and read it MANY times. And, read all the threads in the PRO discussion. Download the latest PRO firmware V2.3, install it and learn how to use the Flight Assistant software.
Sept 12, 2018 1:16:07 GMT
propwash: screnegar: SplashDrone PRO Discussion, 7th thread "Wire connection receiver to flight controller Help"
Sept 12, 2018 1:08:34 GMT
screnegar: Also do you repair Drones?
Sept 10, 2018 18:21:22 GMT