areadrone.cat Sorry it took me a while to reply, had to test this when I finished work...
I noticed that your firmware on the gimbal controller is 2.40 b6, I have the latest firmware on mine which is 2.40 b7..... not sure what firmware the new parameter is designed for if any!!!!
Firstly you could try to adjust the power to the pitch motor and see if that stops the shaking. Try and adjust the figure to about 150-160 and press write, then test it to see if that fixes it. (circled in red in the picture below)
The value can be between 0 and 255. The maximum value is 255 which equates to full battery voltage i.e 12 volts to operate the motor.
Try this and see if it fixes your fault. If you wanted to update the firmware then I could post the links to the firmware file if needed.
tbusdrone: New Splash drone 4 having trouble keeping the iphone connected to the drone. I have updated the filmware on the controler the drone and the camera It just keeps loosing connection. Any ideas?
Dec 30, 2021 21:21:40 GMT
gcthompson61: I get a continuous blinking light on the left side of my transmitter when I turn on transmitter. I also can’t unlock the motors.
Aug 15, 2021 15:27:00 GMT
atlantic: Why is there no image on my RC?
May 16, 2021 14:10:31 GMT
mod95: Hey any one out in our SD world have a Auto Plus flight controller? willing to let 1 go?
Feb 5, 2021 1:37:41 GMT
corsair40: j'ai un splash drone 3+je suis incapable de le met a jour, j'aimerais savoir comment,,,,,,,,,,,,,merci
Dec 15, 2020 18:41:59 GMT
ryzer: Disconnected the flight controller , anyone got pictures of connectors at both ends?
Nov 23, 2020 12:15:01 GMT
tyuyrt: Hello, I just installed a new GPS with lid - it only works when the lid and cable are dangling down the side of the drone; as soon as I close the lid the lights flash yellow red and green and I cannot take off. I'd appreciate any insights.
Oct 22, 2020 21:49:32 GMT
robertinmaine: I have a Splash Drone 3 with an intermittent issue with recording/pictures. After several attempts to fix over emails, Sent drone and controller to Urban Drones, fixed, said it was a pairing issue. Worked for 1 flight Records when on WIFI. Suggestion?
Aug 18, 2020 13:32:32 GMT
vladko: Is it possible to change the remote control of Splash Drone with Splash Drone 3? What are the requirements if this is possible?
Jul 3, 2020 22:55:58 GMT
chris: I had to go through all the settings in the app (computer) and reset some settings as well as reset some of the defaults. After that I was good to go again.
May 8, 2020 22:32:57 GMT
chris: marksdrone: just had the same issue with mine. It may be the accelorometer that you need to calibrate first and then do the compass after that.
May 8, 2020 22:31:44 GMT
marksdrone: Hi everyone.. i just got a older splash..auto .2017 model..it wont calibrate. Goes through the motions . Untill i get that single blink. When i pull down to activate motors the single blink turns solid.and nothing happens . please help..
May 7, 2020 17:15:21 GMT
chris: Can't wait to get the old bird back up in the air and test tomorrow!!
May 2, 2020 3:10:52 GMT
chris: I then got the "green paper airplane" once again.
May 2, 2020 3:10:16 GMT
chris: I had to pair UAV-1 (receiver) to my phone then I could open the app and connect to UAV-2(transmitter)
May 2, 2020 3:09:42 GMT
chris: Also I didi have to play around with the bluetooth on my phone with transmitter and receiver.
May 2, 2020 3:08:55 GMT