Thank you I'm in Australia and we all have our throttle on the right hand side where I think others have it on the left My throttle is on the right and correct. But my yaw control used to be on the throttle side too which I liked, now it has changed and is on the left and the Allston control is on the right it was easier to fly when the left stick was pretty much a simple forward backward left right operation and the right stick throttle and yaw direction. I don't even know how it changed in the first place and wondered why I was having trouble flying till I realized this. Thank you for any help
i have mine now on mode 3 which hopefully puts my yaw and throttle on the right :-)
manhyperss Glad you got it sorted, sounds like a standard between controllers then 2 for left and 3 for right.
If you wanted to do a quick video showing how to access the stick mode and adjust you could put it in the tutorial section to assist others if they have the same issue or just wanting to change the stick mode.
mod95: Hey any one out in our SD world have a Auto Plus flight controller? willing to let 1 go?
Feb 5, 2021 1:37:41 GMT
corsair40: j'ai un splash drone 3+je suis incapable de le met a jour, j'aimerais savoir comment,,,,,,,,,,,,,merci
Dec 15, 2020 18:41:59 GMT
ryzer: Disconnected the flight controller , anyone got pictures of connectors at both ends?
Nov 23, 2020 12:15:01 GMT
tyuyrt: Hello, I just installed a new GPS with lid - it only works when the lid and cable are dangling down the side of the drone; as soon as I close the lid the lights flash yellow red and green and I cannot take off. I'd appreciate any insights.
Oct 22, 2020 21:49:32 GMT
robertinmaine: I have a Splash Drone 3 with an intermittent issue with recording/pictures. After several attempts to fix over emails, Sent drone and controller to Urban Drones, fixed, said it was a pairing issue. Worked for 1 flight Records when on WIFI. Suggestion?
Aug 18, 2020 13:32:32 GMT
vladko: Is it possible to change the remote control of Splash Drone with Splash Drone 3? What are the requirements if this is possible?
Jul 3, 2020 22:55:58 GMT
chris: I had to go through all the settings in the app (computer) and reset some settings as well as reset some of the defaults. After that I was good to go again.
May 8, 2020 22:32:57 GMT
chris: marksdrone: just had the same issue with mine. It may be the accelorometer that you need to calibrate first and then do the compass after that.
May 8, 2020 22:31:44 GMT
marksdrone: Hi everyone.. i just got a older splash..auto .2017 model..it wont calibrate. Goes through the motions . Untill i get that single blink. When i pull down to activate motors the single blink turns solid.and nothing happens . please help..
May 7, 2020 17:15:21 GMT
chris: Can't wait to get the old bird back up in the air and test tomorrow!!
May 2, 2020 3:10:52 GMT
chris: I then got the "green paper airplane" once again.
May 2, 2020 3:10:16 GMT
chris: I had to pair UAV-1 (receiver) to my phone then I could open the app and connect to UAV-2(transmitter)
May 2, 2020 3:09:42 GMT
chris: Also I didi have to play around with the bluetooth on my phone with transmitter and receiver.
May 2, 2020 3:08:55 GMT
chris: Had a hell of a time with the compass. Also make sure the last page it is on COM not RC.
May 2, 2020 3:08:28 GMT
chris: Got my old school app to work! Messed around a bit in the swellpro computer program and made sure all settings were recognized.
May 2, 2020 3:07:53 GMT